Care & maintenance
Cast stone is durable, but it is still a natural-looking porous surface. A little routine care keeps the finish even and the color true for decades.
Dust regularly
A soft dry cloth or brush is enough for weekly upkeep.
Mild soap and water
For deeper cleaning use warm water with a pH-neutral soap, then dry.
Seal when needed
A breathable stone sealer protects high-traffic or outdoor surrounds.
Maintenance and cleaning of your fireplace surround
Our customers love the look of their beautiful new fireplace surrounds. What they love nearly as much is the easy upkeep they provide.
After a few years of living with your cast stone mantel, the grit and grime buildup of daily living is inevitable. You may notice that soot and smoke have accumulated in the crevices of your mantel and you're looking to make a change. Fortunately, cleaning our products is a quick and simple process.
How to clean
Regular dusting will keep your mantel maintained and looking healthy. But every few years, a deeper cleaning is necessary. For your convenience we have also included detailed cleaning information on the website. Simply click on the icon and you will be directed to a page that provides detailed cleaning instructions.
Generally, all you need to proceed is a mild liquid detergent and a soft, non-wire brush. Wet the stone first, then gently scrub smoke and soot marks. Rinse with clean water. It can take a day or two for your mantel to dry completely. After cleaning, it should look like new.
Dealing with stubborn stains
Stubborn stains may resist this gentle cleaning process. The good news is, assuming your fireplace surround was properly sealed during installation, most stains are removable.
If you know what caused the stain, you can research its solvents and determine the best way to remove it. Otherwise, you can try a general purpose stain remover, such as Goof Off, which is used for graffiti removal on cement-based products. You apply Goof Off as described above, scrubbing with your non-abrasive, non-wire brush. Then you rinse and let it dry. A muriatic acid solution (75 percent water, 25 percent acid) is also a stain remover for cast stone. If you're using these heavier chemicals, be sure to wear gloves and eye protection, just in case of splashes.
GFRC fireplace surrounds (outdoor and indoor)
Sealer
Your fireplace surround should be treated with a quality sealer that provides maximum protection against oils, water, and acids. The sealer is freshly applied following installation of the product and requires a few weeks to achieve full protection. After this, care must still be taken to maintain your concrete surface.
Care
Keep the fireplace surround clean; wipe with a damp microfiber cloth once a week. Wipe up spills when they occur. Use only mild soap and warm water. Use coasters or trivets for heavy objects (pots, vases, sculptures).
Caution
Do not clean using any abrasives or chemicals. Chips may occur if struck with another hard object and are not easily repaired. Acids, vinegar, or fruit juices may leave a light stain. Oils may leave a dark stain that will fade over time.
Sliding heavy or sharp objects across the surface can cause scratches and damage to the sealer. Do not cut or use sharp instruments directly on the surface of the surround. Do not sit or stand on the surround, especially in vulnerable areas.
Maintenance
The appearance of the surface of the surround will likely change over time, due to wear and tear through normal use. The sealer may wear over time, so if the surface is no longer repelling as normal, please inquire about services to reseal your fireplace surround.
Should you have any questions or need our services, please call us or send an email. Thank you for choosing LA Precast Mantels!
Download the cleaning & maintenance guide (PDF)